Thread Review (Newest First) |
Posted by Hacksaw Hal - 02-28-2018, 06:45 AM |
removing the site and reconfiguring it worked. i thought i had tried that before but obviously not- or i made a mistake first time |
Posted by SaT_Admin - 02-27-2018, 12:42 PM |
(02-27-2018, 04:41 AM)Hacksaw Hal Wrote: thanks. everything working ok again now Ok. Do you remember which solution solved it for you? |
Posted by Hacksaw Hal - 02-27-2018, 04:41 AM |
thanks. everything working ok again now |
Posted by SaT_Admin - 02-27-2018, 01:42 AM |
(02-27-2018, 01:19 AM)Hacksaw Hal Wrote: hi (02-27-2018, 01:35 AM)Hacksaw Hal Wrote: the problem seems to be the size of the tables i configured for pokerstars- they are configured 536 x 396. it does stack the table but immediately bounces it back to the grid. it works on larger sizes but not this. should it be working on 536 x 396? I would think it should work at that table size. But the problem is that SaT is not detecting when it is your turn to act. There can be a few different reasons for this. I'd run this Test and maybe try Removing and re-Including the site: http://www.stackandtile.com/sat/help/tab...ncorrectly Worst case is you can try creating a File->New Layout, and resizing a Stars table with your mouse slightly larger than 536x396, and then pressing F7 during the New Layout wizard. And then see if it works in this new layout with a slightly larger slot size |
Posted by Hacksaw Hal - 02-27-2018, 01:35 AM |
the problem seems to be the size of the tables i configured for pokerstars- they are configured 536 x 396. it does stack the table but immediately bounces it back to the grid. it works on larger sizes but not this. should it be working on 536 x 396? |
Posted by Hacksaw Hal - 02-27-2018, 01:19 AM |
hi i now have a problem on pokerstars where the tables do not stack. it still works on the very first 4 table configuration i made but not on 6 table configurations although it did before. i tried creating a new one but that didn't work either |
Posted by SaT_Admin - 02-24-2018, 06:50 AM |
its all good.. let me know if you notice anything that doesn't work |
Posted by Hacksaw Hal - 02-24-2018, 06:36 AM |
thanks seems to be ok now i started new thread because i wasn't sure if this was a purely setup problem or not |
Posted by vitinhodzi - 02-24-2018, 06:02 AM |
Fixed with the last version! TY |
Posted by SaT_Admin - 02-24-2018, 05:38 AM |
PartyPoker put out an update yesterday which broke SaT. Other users reported it just a few threads down. Download this version v2.95n http://www.stackandtile.com/sat/tmp/Stac...p-295n.exe Make sure that you have 3 color action buttons enabled, as described on the PartyPoker help page: http://www.stackandtile.com/sat/help/partypoker Then Remove and re-Include PartyPokerModern and let me know how it goes. If you notice any problems, please come back and tell me. |
This thread has more than 10 replies. Read the whole thread. |