Problems after update
#7
Ok, so I tried to go with built-in settings. Results :

Layout 1 :

1. Pokerstars - built in PokerStarsBlack
2. Fulltilt - built in FullTiltPoker

There is still problem with hand history window for PokerStars. It can't be Party setting, because I tested this layout alone, only this 2 site settings. Something to check.

Layout 2 :

1. Party - custom
2. Ongame - custom
3. Bossmedia - custom
4. Micro - custom
5. iPoker - built-in iPoker
6. 888 - built-in 888PacificPoker
7. Merge - built-in MergeBig
8. Cake - built-in Revolution_100_Small


Here I couldn't use Party built-in and Ongame built-in settings. PartyPokerClassic won't work for me, and PartyPokerModern can be added, but goes to grid when buttons are visible. It's probably because of colours conflict or something like that, so here I just stayed with my custom, which work fine.

When I added OnGame it obv went nuts. My custom setting also make it crazy, but in different way. When I added built-in setting, I couldnt even move mouse, it took over and keep resizing for couple seconds. Finally it stopped and table was very small. It was detected correctly and move back to stack correctly, but it check/call when should fold. I couldn't make it bigger, tried for couple minutes. I kept chat hidden and did other things recommended in "help".

Now when I use my custom one, its a little bit different. When I open table its not taking over my mouse automatically. I can try to resize to the size I want. Obv it will work correctly (right click making fold and moving to stack) only if I will resize it to very specific size, which is sometimes tilting and hard, but then its fine when I finally manage to do it (usually try to do it on start of the session). Correct size here is much bigger than size in built-in setting.






Now Merge. I know what's the root of problem now. It's Party lobby...

Here's what happend during testing :

a) Merge table on, Party table on, Ongame table on - Merge table not going to stack
b) Merge table on, Cake table on - Merge table going to stack

so I did more testing and :

c) Merge table on, Cake table on, Party lobby on - not going
d) Merge table on, 888/Ongame/iPoker lobby on - going

and finally :

e) Merge table on, Party lobby on - not going


After that I tried to put out Party setting from layout. Didn't made any difference, still not going to stack. I also tried to make changes in Party lobby settings, but no luck here.

Since I used Merge built-in setting I think you could try to check it out.


Test session tomorrow, will report after.

Reply


[-]
Quick Reply
Message
Type your reply to this message here.

Username::
Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)
Please select the number: 3
1 2 3 4 5 6 7 8 9 10

Messages In This Thread
Problems after update - by Guest - 02-13-2013, 12:25 PM
RE: Problems after update - by SaT_Admin - 02-14-2013, 03:07 AM
RE: Problems after update - by Guest - 02-14-2013, 08:49 AM
RE: Problems after update - by SaT_Admin - 02-14-2013, 11:12 AM
RE: Problems after update - by Guest - 02-14-2013, 02:14 PM
RE: Problems after update - by SaT_Admin - 02-15-2013, 04:09 AM
RE: Problems after update - by Guest - 02-17-2013, 12:49 PM
RE: Problems after update - by SaT_Admin - 02-17-2013, 01:45 PM
RE: Problems after update - by Guest - 02-17-2013, 02:45 PM
RE: Problems after update - by SaT_Admin - 02-17-2013, 08:47 PM
RE: Problems after update - by Guest - 02-19-2013, 02:25 PM
RE: Problems after update - by SaT_Admin - 02-20-2013, 05:37 AM
RE: Problems after update - by Guest - 02-20-2013, 04:35 PM
RE: Problems after update - by SaT_Admin - 02-21-2013, 11:24 AM
RE: Problems after update - by Guest - 02-23-2013, 05:08 AM
RE: Problems after update - by SaT_Admin - 02-23-2013, 07:09 PM
RE: Problems after update - by SavantDream - 02-28-2013, 03:19 AM
RE: Problems after update - by SaT_Admin - 02-28-2013, 06:07 AM
RE: Problems after update - by SavantDream - 03-11-2013, 09:43 AM
RE: Problems after update - by SaT_Admin - 03-11-2013, 09:55 AM
RE: Problems after update - by SavantDream - 03-11-2013, 10:30 AM
RE: Problems after update - by SaT_Admin - 03-11-2013, 12:37 PM
RE: Problems after update - by SavantDream - 03-11-2013, 02:59 PM
RE: Problems after update - by SaT_Admin - 03-11-2013, 04:16 PM
RE: Problems after update - by SavantDream - 03-18-2013, 11:24 AM
RE: Problems after update - by SaT_Admin - 03-19-2013, 10:01 AM
RE: Problems after update - by SavantDream - 04-28-2015, 10:47 PM
RE: Problems after update - by SaT_Admin - 04-29-2015, 02:43 AM
RE: Problems after update - by SavantDream - 04-29-2015, 10:01 PM
RE: Problems after update - by SaT_Admin - 05-01-2015, 07:10 AM
RE: Problems after update - by chisna - 05-15-2015, 01:02 PM
RE: Problems after update - by SaT_Admin - 05-15-2015, 01:17 PM
RE: Problems after update - by chisna - 05-17-2015, 12:18 PM
RE: Problems after update - by chisna - 05-17-2015, 12:17 PM
RE: Problems after update - by SaT_Admin - 05-17-2015, 12:34 PM
RE: Problems after update - by chisna - 05-17-2015, 02:12 PM
RE: Problems after update - by SaT_Admin - 05-18-2015, 12:37 AM
RE: Problems after update - by Guest - 05-18-2015, 12:14 PM
RE: Problems after update - by SaT_Admin - 05-18-2015, 12:43 PM
RE: Problems after update - by chisna - 05-18-2015, 03:06 PM
RE: Problems after update - by SaT_Admin - 05-18-2015, 03:24 PM
RE: Problems after update - by chisna - 05-20-2015, 01:43 PM
RE: Problems after update - by strikerspb - 05-23-2015, 03:25 AM
RE: Problems after update - by sat.admin - 05-23-2015, 10:49 AM