Problems after update

[SaT_Admin]

Thanks for the detailed and specific post.

Layout 1 :

1. Pokerstars - built in PokerStarsBlack

There is still problem with hand history window for PokerStars. It can't be Party setting, because I tested this layout alone, only this 2 site settings. Something to check.

Are you sure its the HH window? Or do you mean the Replayer window? The Replayer window is a known issue and will get detected as a normal table. The HH window should not. I am testing it right now and it is correctly not getting detected for me.

Does it happen every time you open the HH window or only randomly?

Layout 2 :

1. Party - custom

Here I couldn't use Party built-in and Ongame built-in settings. PartyPokerClassic won't work for me, and PartyPokerModern can be added, but goes to grid when buttons are visible. It's probably because of colours conflict or something like that, so here I just stayed with my custom, which work fine.

Tables are supposed to go to the grid when the buttons are visible...

If you can describe the problem better, I can try to help you get the built-in PartyPokerModern working. Your custom Party config will give you problems, same with your custom 888. Its good that you are now using the built-in 888 settings.

Layout 2 :

When I added OnGame it obv went nuts. My custom setting also make it crazy, but in different way. When I added built-in setting, I couldnt even move mouse, it took over and keep resizing for couple seconds. Finally it stopped and table was very small. It was detected correctly and move back to stack correctly, but it check/call when should fold. I couldn't make it bigger, tried for couple minutes. I kept chat hidden and did other things recommended in "help".

Yes, this problem is described here, look at #4
http://www.stackandtile.com/sat/help/ongame

What is happening is that SaT is trying to resize the OnGame tables to the gridslot size. The best thing to do is open ONE OnGame table, allow SaT to resize it, and then close the table. The OnGame client should now 'remember' that closed table size, and open up all new tables that same size. That way, SaT won't need to resize anything anymore.

Layout 2 :

2. Ongame - custom

Now when I use my custom one, its a little bit different. When I open table its not taking over my mouse automatically. I can try to resize to the size I want. Obv it will work correctly (right click making fold and moving to stack) only if I will resize it to very specific size, which is sometimes tilting and hard, but then its fine when I finally manage to do it (usually try to do it on start of the session). Correct size here is much bigger than size in built-in setting.

SaT requires all of the tables to be the size of the gridslots. To do this, it resizes every new table that it detects. However, OnGame doesn't redraw its tables properly, so with your custom settings, the resize probably ends up incorrect, which is why you have to resize it yourself.

With the built-in settings, SaT will try to resize the OnGame table by taking over your mouse, and clicking and dragging in the lower right corner of the table, which usually gets to the proper size.

However, taking over the mouse like that is very intrusive as you have experienced. Thats why, using the built-in settings, you should open up ONE OnGame table and do nothing with your mouse, allow SaT to resize only ONE table at first, and then CLOSE that table. Then check and see if any new OnGame tables will open to that same size.

Layout 2 :

1. Party - custom
2. Ongame - custom
7. Merge - built-in MergeBig

Now Merge. I know what's the root of problem now. It's Party lobby...

Here's what happend during testing :

a) Merge table on, Party table on, Ongame table on - Merge table not going to stack
b) Merge table on, Cake table on - Merge table going to stack

so I did more testing and :

c) Merge table on, Cake table on, Party lobby on - not going
d) Merge table on, 888/Ongame/iPoker lobby on - going

and finally :

e) Merge table on, Party lobby on - not going


After that I tried to put out Party setting from layout. Didn't made any difference, still not going to stack. I also tried to make changes in Party lobby settings, but no luck here.

Since I used Merge built-in setting I think you could try to check it out.


Test session tomorrow, will report after.

Ok, yes, I know the problem. Actually, another user reported the same problem already, and I have fixed it in my development version, I just didn't release it to the public yet.

Let me guess: if you play on Merge + Party, and if you use a "Stack Table" hotkey, it WILL work. But "Fold+Stack" will not (which is what you have been trying)