| Thread Review (Newest First) |
| Posted by SaT_Admin - 01-02-2018, 06:06 AM |
(01-01-2018, 02:30 PM)Guest Wrote: Any way to get jackpot sit and gos on Bodog to work? Can you please try v2.95d it should work with BodogIgnition jackpots: http://www.stackandtile.com/sat/tmp/Stac...p-295d.exe |
| Posted by - 01-01-2018, 02:30 PM |
| Any way to get jackpot sit and gos on Bodog to work? |
| Posted by SaT_Admin - 10-31-2017, 03:59 AM |
(10-31-2017, 03:19 AM)Guest Wrote: My tables work with stack and tile which is the main and most important thing for me. But the size of the table is much bigger than my ACR site. Bovada doesn't get sized correctly. Is there a workaround to get it to size correctly? Is your ACR table small? If you turn off SaT altogether, are you able to resize the Bovada table with your mouse to match the size of the ACR table? If not, then there is nothing SaT can do, because Bovada itself isn't allowing the table to be that small? |
| Posted by - 10-31-2017, 03:19 AM |
| My tables work with stack and tile which is the main and most important thing for me. But the size of the table is much bigger than my ACR site. Bovada doesn't get sized correctly. Is there a workaround to get it to size correctly? |
| Posted by SaT_Admin - 10-17-2017, 01:56 AM |
(10-17-2017, 01:39 AM)Guest Wrote: I can't even get it to recognize the table for Bovada when I hit f9. Works fine for ACR and BOL What version of SaT are you using? Did you read the post directly above yours? |
| Posted by - 10-17-2017, 01:39 AM |
| I can't even get it to recognize the table for Bovada when I hit f9. Works fine for ACR and BOL |
| Posted by SaT_Admin - 10-12-2017, 10:24 AM |
|
Can you please download this version v2.94y2 and try it: http://www.stackandtile.com/sat/tmp/Stac...-294y2.exe Some tweaks were made to try to fix this. Realize, that this is gonna be a problem until Bodog fixes their software. All I can do is try to work around it. 1. Remove 'BovadaBodog' from SaT if you have it, and then Include the new site 'BodogIgnition' 2. If you get the "Button detected as black" error message during Include Site setup when you press F10, then you should cancel and go into Advanced Options and change the Scan Mode to "PW" and then try again. If you still get the 'black' error message, and are using Win10, please try solution #2 on this page: http://www.stackandtile.com/sat/help/windows-10-fix Ultimately we need the site to pass this Test: http://www.stackandtile.com/sat/help/tab...ncorrectly 3. If FAILURE RESIZING error occurs, then the table will simply get "Ignored" from SaT. You can set up an "Ignore Table" hotkey to try to un-ignore the table when that occurs, and SaT will try again to resize the table. This has been a problem for many users, but in this latest version hopefully you will not get this error every time, and at least SOME TIMES it will work and successfully resize the table. If you do still get that FAILURE RESIZING error every time, then you can help me out by doing this.. Please click on File->Current Layout, and add this line to the top of the file, underneath the [settings] line: Code: [settings]Save the file, and then close and re-open SaT. This will enable logging and some debug info. Also close and re-open Bodog. Then test again. This time, after you get the FAILURE RESIZING error, just press Stop. Then go to this folder: C:\Program Files (x86)\StackAndTile\ Find the file "logg.txt" and email it to me at: support(at)stackandtile(dot)com Then you can go back and delete that 'logging' line |
| Posted by SaT_Admin - 10-10-2017, 04:09 PM |
(10-10-2017, 03:34 PM)maniaman23 Wrote: I did try changing the scan mode to PW before and it didn't fix it. What did was clicking "Disable display scaling on high DPI settings" which was explained in the Windows 10 fix.And that was the checkbox in the Bodog shortcut properties? If so, thats good to know. On the newer Win10 update, they've renamed that setting to "Override high DPI scaling behavior" and added a dropdown (10-10-2017, 03:34 PM)maniaman23 Wrote: I have tried many times to create new layouts and resizing with my mouse. None of it seems to work. I still get the Failure Resizing error.I'm sorry I don't really know what else to do.. Ultimately this is a bug in the Bodog software. When I drag and drop a table, the table grows in size on the drop. This happens by itself with no external software. Many people on 2p2 report the same thing. Maybe emailing them will cause them to fix their shitty software. The more people who email them, the better the chance I will look into this further tomorrow and see if I can do anything else. Please check back! |
| Posted by maniaman23 - 10-10-2017, 03:34 PM |
(10-10-2017, 03:03 PM)SaT_Admin Wrote:(10-10-2017, 02:51 PM)maniaman23 Wrote: So I can't really explain it but I am not receiving the "button detected as black" anymore. So now it recognizes the buttons. I use Windows 10 and went through your Windows 10 fix.Maybe you hadn't changed the Scan Mode to PW before? I did try changing the scan mode to PW before and it didn't fix it. What did was clicking "Disable display scaling on high DPI settings" which was explained in the Windows 10 fix. I have tried many times to create new layouts and resizing with my mouse. None of it seems to work. I still get the Failure Resizing error. |
| Posted by SaT_Admin - 10-10-2017, 03:03 PM |
(10-10-2017, 02:51 PM)maniaman23 Wrote: So I can't really explain it but I am not receiving the "button detected as black" anymore. So now it recognizes the buttons. I use Windows 10 and went through your Windows 10 fix.Maybe you hadn't changed the Scan Mode to PW before? (10-10-2017, 02:51 PM)maniaman23 Wrote: But I am still getting the FAILURE RESIZING error. I've spent about 4 hours trying to fix this. Idk what to try anymore. When I think everything might be working the table will start to resize itself and then I get the error again. Can you try creating a File->New Layout, and resizing a Bodog table with your mouse first, and then pressing F7, so that the grid slot size will be based off of a native Bodog size, and then Include the site into this new layout, and tell me if it works? |
| This thread has more than 10 replies. Read the whole thread. |