| Thread Review (Newest First) |
| Posted by stevenheard - 09-29-2020, 01:14 AM |
(09-14-2020, 10:58 PM)SaT_Admin Wrote:(09-14-2020, 10:53 PM)stevenheard Wrote: Unfortunately, I cannot get this to work - but the original workaround does Sorry for the delay in getting back to you. Was using the old system idea and forgot about the thread. Yes it works perfectly now that I have switched it on. Thank you. I have another issue that I will post in a new post. Thanks again for all your help. Steven |
| Posted by SaT_Admin - 09-14-2020, 10:58 PM |
(09-14-2020, 10:53 PM)stevenheard Wrote: Unfortunately, I cannot get this to work - but the original workaround does Sorry, I thought I turned it on by default, but I guess I didnt. Can you go the the SAT menu for Settings -> Advanced Options, click on the Sites tab, and then turn on the last setting at the bottom? And then test and let me know |
| Posted by stevenheard - 09-14-2020, 10:53 PM |
Quote:In this version, SAT will automatically detect the "I am back" button on PartyPokerModern only, and click it to sit you back in. Please download and try it. Unfortunately, I cannot get this to work - but the original workaround does |
| Posted by stevenheard - 09-13-2020, 11:03 PM |
|
I have it working now. The reason being that I needed to close the client to effect the changes I made. So next day - it worked :-) However, I will try your new version and let you know asap. Thanks for all your help. I love the software. Steve |
| Posted by SaT_Admin - 09-13-2020, 02:27 PM |
(09-08-2020, 05:14 PM)stevenheard Wrote: Playing Party Poker - I get sat out. I've created this new version 2.99.10k: http://www.stackandtile.com/sat/tmp/Stac...29910k.exe In this version, SAT will automatically detect the "I am back" button on PartyPokerModern only, and click it to sit you back in. Please download and try it. But we should also still try to figure out why the Old Tables isn't working for you.. |
| Posted by SaT_Admin - 09-09-2020, 08:04 PM |
(09-09-2020, 02:27 PM)stevenheard Wrote: Hi, thanks for getting back so promptly. You can confirm if its correct by using Help->Show Testing Info, and see if it shows Action Required = YES, when it is your turn to act, and NO when it isn't. (09-09-2020, 02:27 PM)stevenheard Wrote: Mainly, when I enter new tournaments, the new tournament comes over the top of a table that needs action, resulting in me sitting out.Multiple users have told me that PartyPoker has a bug, and in two cases, they will pop up their tables to the top, which causes focus stealing: 1. when a new tournament starts 2. when someone gets knocked out, or maybe when a bounty knockout happens, i forget You can test this for yourself without SAT altogether. Just open up some tables, then start a new tournament and see if the new tournament pops above (09-09-2020, 02:27 PM)stevenheard Wrote: I saw the work around notes were;Old Tables should work as long as SAT can detect that action is required. So you should check the Testing Info mentioned above. The only other thing to consider is, that for SAT to know the duration, SAT needs to first be able to detect the first action required and pop the table up at least once on its own. Again, this is easy to test, it should work even on play money: open one table, allow SAT to pop up the table once, and then manually sit out. After the 1 minute duration, SAT should move the table to grid. If its failing, then I'd check the Testing Info to make sure that SAT is detecting action required correctly. If its not, run through these solutions: https://www.stackandtile.com/sat/help/ta...ncorrectly |
| Posted by stevenheard - 09-09-2020, 02:27 PM |
|
Hi, thanks for getting back so promptly. I done the three colour action at the beginning and reinstalled and that worked as stated. As far as I am aware most of the features seem to work and the tables stack and tile. Mainly, when I enter new tournaments, the new tournament comes over the top of a table that needs action, resulting in me sitting out. I saw the work around notes were; " I've now set it up to move to grid in 3 minutes of inactivity! - Cool. Usually a lower number is better than a higher number" So I set "Old Tables Duration (mins) to 1 - as I did not want to leave for longer than a minute before it pops back to the grid as I only play 4-5 max tables at the moment. However, the old table does not snap to grid. All I am asking is are there any other settings that I need to change or should NOW change the Old Tables Duration to 2 or 3? Thank you Steve |
| Posted by SaT_Admin - 09-09-2020, 12:20 AM |
(09-08-2020, 04:43 PM)Guest Wrote: Hi, I have the same problem. "Definitely" does not work? What doesn't work? Does SAT correctly detect when action is required on your Party tables? Please use Help->Show Testing Info, and see if it shows Action Required = YES, when it is your turn to act, and NO when it isn't. If that's not working, make sure you have Party set up correctly, especially that you have turned on "3 color action buttons" inside the Party client settings, and then Remove and re-Include the site: https://www.stackandtile.com/sat/help/partypoker Using Old Tables Duration = 1 will end up with a bunch of false positives, in cases where some players are tanking or stalling on purpose |
| Posted by stevenheard - 09-08-2020, 05:14 PM |
Registered now  Hi, I have the same problem. Playing Party Poker - I get sat out. I have the old duration tables set at 1 - but this definitely does not work. Do I need to configure anything else? Thanks |
| Posted by stevenheard - 09-08-2020, 05:12 PM |
|
Registered now :-) Hi, I have the same problem. Playing Party Poker - I get sat out. I have the old duration tables set at 1 - but this definitely does not work. Do I need to configure anything else? Thanks |
| This thread has more than 10 replies. Read the whole thread. |