ACR / WinningPoker update - Printable Version +- StackAndTile Forums (https://www.stackandtile.com/forum) +-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1) +--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2) +--- Thread: ACR / WinningPoker update (/showthread.php?tid=1988) |
RE: ACR update - SaT_Admin - 05-24-2019 (05-24-2019, 07:20 AM)wuwu Wrote:(05-24-2019, 04:41 AM)SaT_Admin Wrote: Cycling the stack should work, not sure why that is failing.. Right, if SaT is always thinking that action is required, that's a big problem. And it also explains why the stack won't cycle, because SaT thinks the top table in the stack requires your action. Anyway Please download and try this version v2.98.04b http://www.stackandtile.com/sat/tmp/StackAndTile_Setup-29804b.exe Remove any custom Winning sites you had added Include "WinningPoker" Test and let me know. It should work on normal table sizes. If you get a message "not supported yet" its because your table size is too tall RE: ACR update - wuwu - 05-24-2019 (05-24-2019, 03:31 PM)SaT_Admin Wrote:(05-24-2019, 07:20 AM)wuwu Wrote:(05-24-2019, 04:41 AM)SaT_Admin Wrote: Cycling the stack should work, not sure why that is failing.. F10 to fold did not work (also, I did not get a message saying "not supported yet") RE: ACR update - SaT_Admin - 05-25-2019 (05-24-2019, 11:43 PM)wuwu Wrote: F10 to fold did not work (also, I did not get a message saying "not supported yet") Are you sure you're on 2.98.04b version? I tested your gridslot size on both win7 and win10 and it worked for me. Can you leave me your skype name? RE: ACR update - wuwu - 05-25-2019 (05-25-2019, 02:14 AM)SaT_Admin Wrote:(05-24-2019, 11:43 PM)wuwu Wrote: F10 to fold did not work (also, I did not get a message saying "not supported yet") Yes to me being on version 2.98.04b. skype = Inspectah Deck I look forward to hearing from you. RE: ACR update - SaT_Admin - 05-25-2019 (05-25-2019, 02:42 AM)wuwu Wrote: Yes to me being on version 2.98.04b. there's a lot of Inspectah Deck's, whats your username? RE: ACR update - wuwu - 05-25-2019 (05-25-2019, 02:42 AM)wuwu Wrote:(05-25-2019, 02:14 AM)SaT_Admin Wrote:(05-24-2019, 11:43 PM)wuwu Wrote: F10 to fold did not work (also, I did not get a message saying "not supported yet") not sure if you need the email, if so... edited@gmail.com RE: ACR update - Guest - 05-25-2019 (05-25-2019, 02:48 AM)wuwu Wrote:(05-25-2019, 02:42 AM)wuwu Wrote:(05-25-2019, 02:14 AM)SaT_Admin Wrote:(05-24-2019, 11:43 PM)wuwu Wrote: F10 to fold did not work (also, I did not get a message saying "not supported yet") edited RE: ACR update - SaT_Admin - 05-25-2019 Ok we got it working with this version v2.98.04d http://www.stackandtile.com/sat/tmp/StackAndTile_Setup-29804d.exe Everyone else please download that version Remove and re-Include "WinningPoker". It should now work on all table sizes. Let me know the results good or bad RE: ACR / WinningPoker update - SaT_Admin - 05-26-2019 (05-25-2019, 03:39 AM)SaT_Admin Wrote: Ok we got it working with this version v2.98.04d One issue remains because of a bug within WinningPoker: Normally SaT requires the user to turn off the "pop up tables" option within the poker site, so that SaT can handle that instead. WinningPoker has a setting which is supposed to allow you to turn this on or off, and they call their setting "Auto switch between tables". However, this setting does not work properly. If you turn it off, it sometimes still pops up tables. It would help if people send emails to them to ask for this to be fixed RE: ACR / WinningPoker update - Acesup - 05-31-2019 Would like to add ACR into my grid of tables but F9 still not working. Where are we at with this? (Tournaments) |