+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2)
+--- Thread: BOL fold click in wrong place (/showthread.php?tid=1994)
BOL fold click in wrong place - BOL_Issue - 06-06-2019
So I have the tables on BetOnline scaled down and resized to this with stack and tile
![[Image: 39adeb5ae508d9181b3eb07734633cc1.png]](https://i.gyazo.com/39adeb5ae508d9181b3eb07734633cc1.png)
When it is my action, the fold hotkey works fine. However when it is not my action and it is at the part where it shows
![[Image: d825e259bdcc30963c7f47173d0a4d9a.png]](https://i.gyazo.com/d825e259bdcc30963c7f47173d0a4d9a.png)
I attached the GIF that shows how it clicks under the box about 20px or something.
https://i.gyazo.com/9cfc65e0b5252cb7b7b3c41ed0e23dc0.mp4
It is like the same situation that Ignition/Bovada has where the fold spot moves based on if it is your action or not. I want to make a custom site setup for it, and if i can get the correct coordinates for both buttons. How would I put that in the text file? Is that something I can even setup in the text file like if I wanted to replicate what is happening in the ignition setup. Everything works perfect on ignition.
RE: BOL fold click in wrong place - SaT_Admin - 06-07-2019
As with all sites, you need to make sure the poker client is set up correctly:
https://www.stackandtile.com/sat/help/supported-sites
In this case specifically, the problem is likely due to the fact that you haven't turned off the window switcher bar at the bottom of the BOL tables:
https://www.stackandtile.com/sat/help/chico
Please try that, then Remove and re-Include the site, and let me know
RE: BOL fold click in wrong place - BOL_Issue - 06-08-2019
(06-07-2019, 06:49 PM)SaT_Admin Wrote: As with all sites, you need to make sure the poker client is set up correctly:
https://www.stackandtile.com/sat/help/supported-sites
In this case specifically, the problem is likely due to the fact that you haven't turned off the window switcher bar at the bottom of the BOL tables:
https://www.stackandtile.com/sat/help/chico
Please try that, then Remove and re-Include the site, and let me know
Wow! Thank you so much for that, didn't even notice. Truly thank you for making such great software and providing even better support
RE: BOL fold click in wrong place - SaT_Admin - 06-08-2019
great