StackAndTile Forums
PartyPoker: table always requires action / stays in front - Printable Version

+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2)
+--- Thread: PartyPoker: table always requires action / stays in front (/showthread.php?tid=2131)



PartyPoker: table always requires action / stays in front - yiiit1 - 05-05-2020

hey,
i have a problem with partypoker modern, where the table always stays in front. "Show testing info" shows, that the table apparently always requires action.
In addition to that, it seems like SandT is sometimes not able to resize the tables.

any suggestions?


RE: PartyPoker: table always requires action / stays in front - SaT_Admin - 05-06-2020

(05-05-2020, 04:15 PM)yiiit1 Wrote: hey,
i have a problem with partypoker modern, where the table always stays in front. "Show testing info" shows, that the table apparently always requires action.
Typically you'll want to go through the solutions on this page:
https://www.stackandtile.com/sat/help/tables-will-not-stay-stack-tables-pop-incorrectly

One thing specifically with Party is to make sure you have "3 color action buttons" turned on inside the Party client:
https://www.stackandtile.com/sat/help/partypoker

Then try Remove and re-Include the site

(05-05-2020, 04:15 PM)yiiit1 Wrote: In addition to that, it seems like SandT is sometimes not able to resize the tables.
If you are using multiple monitors with different scaling %s, you'll need to try the solutions on this page:
https://www.stackandtile.com/sat/help/windows-10-fix


RE: PartyPoker: table always requires action / stays in front - yiiit1 - 05-08-2020

Hey,
thank you for your answer. I did this:

Then click the button to Change high DPI settings and click the checkbox to "Override high DPI scaling behavior", and choose "Application".

and it helped to fix the "action always required YES" problem.

The table however stays at the same size and cannot increase. It doesn't even matter when I try #2 and perform custom scaling on my desktop.

It's strange, because on Winamax and PokerStars I did the same (change high DPI settings) and it is working.


RE: PartyPoker: table always requires action / stays in front - SaT_Admin - 05-08-2020

PartyPoker has a maximium size to its tables, and their software won't let you resize it any larger above that. Maybe that's your problem?

Are you able to resize the table with your mouse to the size you want, with SAT off?