+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Support Help (https://www.stackandtile.com/forum/forumdisplay.php?fid=2)
+--- Thread: Tables staying in tile and not stacking (/showthread.php?tid=2355)
Tables staying in tile and not stacking - littleA - 07-12-2021
Can't get ACR, GG or PartyPoker to collapse into the the stack pile. I start the tables and they go to the new table slot and they open in the tile slots and not collapse back to the stack pile, same as when I hotkey them into the stack they come back out to the slots and don't collapse back to the stack. Pokerstars is the only one that collapse back. I have uninstalled, remove and re-add sites, i have created a new layout. It was working in the trial and now that i have purchased its not working.
Any ideas let me know frustrated, messing with this program and trying to play my tables
Thanks
RE: Tables staying in tile and not stacking - SaT_Admin - 07-12-2021
If it was working during trial, I would expect it to work the same with a paid subscription. Nothing about this problem should change
Normally I'd suggest you go through the Test on this page and the potential solutions:
https://www.stackandtile.com/sat/help/tables-will-not-stay-stack-tables-pop-incorrectly
First thing to do is run that Test and confirm if this is the problem or not
Especially if you have multiple monitors, you might need to try the solutions on this page:
https://www.stackandtile.com/sat/help/windows-10-scaling-fix