+- StackAndTile Forums (https://www.stackandtile.com/forum)
+-- Forum: General (https://www.stackandtile.com/forum/forumdisplay.php?fid=1)
+--- Forum: Feature Requests (https://www.stackandtile.com/forum/forumdisplay.php?fid=3)
+--- Thread: Taking input from gamepad (/showthread.php?tid=2393)
RE: Taking input from gamepad - SaT_Admin - 10-25-2021
Can you try with a letter instead of F1?
If you set up the gamepad to press letter 'A' in xpadder, and then open up Notepad and press the gamepad button, does the letter 'A' get typed?
If so, can you then try setting up a hotkey for 'A' for "Move table to next slot" in SAT and try pressing the button on Stars and see if it works?
RE: Taking input from gamepad - P106 - 10-25-2021
I did what said, it works with Notepad, but not with SaT
RE: Taking input from gamepad - SaT_Admin - 10-25-2021
Unfortunately I dont have any other ideas... if you could download another poker site like PartyPoker, and try it on play money to see if it works, at least then we'd know if it was an xpadder problem, or an SAT problem, or a PokerStars problem
RE: Taking input from gamepad - P106 - 10-25-2021
It worked with Notepad so it likely not an Xpadder issue also its unlikely PS would infer with these 2 combinations of software specially? I'm just guessing though, will try to download Partypoker later today or tomorrow and make a throwaway account.
RE: Taking input from gamepad - SaT_Admin - 10-25-2021
Ok let me know
RE: Taking input from gamepad - P106 - 10-27-2021
I tested it and acts the same on Party as with PokerStars.
RE: Taking input from gamepad - SaT_Admin - 10-27-2021
(10-27-2021, 03:09 PM)P106 Wrote: I tested it and acts the same on Party as with PokerStars.
So the gamepad fails on Party and Stars, when you are using both Xpadder and SAT
How about this. Don't use SAT at all. Set up the hotkey inside Xpadder for gamepad button = A
And then set up PokerStars's hotkey inside PokerStars for letter A
And see if that works. Leave SAT turned off
RE: Taking input from gamepad - P106 - 10-28-2021
I've tried already but double checked and it works that way. I think the issue is SaT not taking input from Xpadder for some reason. The only thing Xpadder does is transforming a press of a gamepad button to a normal keystroke or combination of keystroke of a keyboard
RE: Taking input from gamepad - SaT_Admin - 10-28-2021
Yeah I thought SAT was supposed to work in combination with that...
Can you click File->Current Layout, and paste me everything?
RE: Taking input from gamepad - P106 - 11-02-2021
Sorry for the late reply, heres my config:
[edited]