SAT biggest fan
Unregistered
Hi,
Whenever I have a decision on Chico or IG that is call or fold, the table doesnt come to the grid!
Obviously a huge problem when 10 tabling.
My guess based on the obvious is SAT doesnt see 3 buttons so it doesnt send us the table?
However WPN never has this issue.
Theres no way im the first to have this issue - but i couldnt find any previous threads on it
Any fix? Kind of a big deal considering how often we end up timing out.
Thanks,
B
Posts: 5,780
Threads: 30
Joined: Apr 2011
07-14-2020, 12:32 AM
(This post was last modified: 07-14-2020, 12:32 AM by SaT_Admin.)
For the "Chico" site, the action button is the Call button. So as long as the 2nd/middle button is visible on the table, the table should move to the grid.
Similarly, for the "BodogIgnition" site, the action button is the Fold button.
So in both cases you describe, the program *should* be working properly.
I suggest you run the Test on this page to confirm if you are seeing the problem or not:
https://www.stackandtile.com/sat/help/ta...ncorrectly
If so, the first thing to try is to Remove and re-Include the site. Let me know what you find
so actually, when it's call or fold, there's no middle button. Fold goes far left and call goes far right.
Posts: 5,780
Threads: 30
Joined: Apr 2011
(07-14-2020, 09:36 AM)bbbb Wrote: so actually, when it's call or fold, there's no middle button. Fold goes far left and call goes far right.
Is that for Chico?
When I was testing, I saw this image, where you can see when facing an all-in, the 1st and 2nd buttons were visible:
https://imgur.com/a/I056a4T
Can you show me a screenshot? If so, I can update SAT
And also as said with Bodog, it should be working, since SAT looks for the Fold button. Are you certain its failing on Bodog?
it must be reading the raise button. i removed and re included Chico, and when it's call or fold, the table doesnt pop into the grid
Posts: 5,780
Threads: 30
Joined: Apr 2011
(07-23-2020, 08:10 PM)Guest Wrote: it must be reading the raise button. i removed and re included Chico, and when it's call or fold, the table doesnt pop into the grid
For Chico, SAT uses the middle button to determine if action is required. The middle button is usually the Call button.
Can you take a screenshot of the table when it fails? That way we can see what buttons are visible
Posts: 5,780
Threads: 30
Joined: Apr 2011
Ok please download and install this version 2.99.07zf
http://www.stackandtile.com/sat/tmp/Stac...9907zf.exe
Then Remove and re-Include the "Chico" site and test it and see if it works