03-20-2014, 01:47 PM
Hrmmm.. yes it must be reading the background as the same as the fold button.
Try this, open up your config file, with File->Current Layout
Directly under the [settings] line, add the line color_variation=4
So it will look like this:
Leave the other settings in tact. Save the file and restart SaT and try again. If it still fails, try using color_variation=0 save and restart again. The default variation I think is "32" which allows a decent amount of difference in shades of colors. So we are going to try to lower the allowed difference and see if it works.
Try this, open up your config file, with File->Current Layout
Directly under the [settings] line, add the line color_variation=4
So it will look like this:
Code:
[settings]
color_variation=4
...
Leave the other settings in tact. Save the file and restart SaT and try again. If it still fails, try using color_variation=0 save and restart again. The default variation I think is "32" which allows a decent amount of difference in shades of colors. So we are going to try to lower the allowed difference and see if it works.