Joy2Key + SAT + ACR

[jveasy]

Hrmmmm, a few things to try

1. By default, SaT sends the hotkeys to the 'table under the mouse'. So when you press your controller button to send the key 'C', that hotkey will fire on whatever table that the mouse cursor is over. Are you sure your mouse is over the table at the time you are pressing it?

2. Does the order in which you start the programs matter?
- Can you try making sure SaT is completely closed first, and then start up  Joy2Key and turn it on, and then open up SaT and press Start?
- Can you try making sure Joy2Key is completely closed, then open SaT and press Start, then open Joy2Key and turn it on?

3. I know other users have used "Xpadder" in the past to use their Xbox controllers. I thought that they set it up exactly like you have: set the joystick button to a letter within Xpadder, and then set the letter to an action within SaT. I'm not sure why Joy2Key isn't working. Can you try Xpadder and see if that works?

Please let me know. This should be possible

I made sure the mouse was over the table. I even played with the advanced settings so that the key presses would be sent to the active table regardless if the mouse was over it but to no avail.

I tried opening the programs in different orders and still no success.

I bought Xpadder today and I am having the same exact issues I was having with JoytoKey.


I again mapped button 'A' on my controller to the letter 'C'.

When I press button 'A' on the controller it sends the key presses to any and all active/selected windows programs (chrome webrowser, notepad, Open/Save windows Dialog boxes etc.) except to SaT.

When i have xpadder running and I open SaT I even tried going to File>Open Layout>Open Other and then I tried pressing the 'A' controller button in the area where you type the filename and nothing. then i switch to any other windows program and I hit the 'A' button and I can see the letter 'C' come up.


I am going to keep playing around with the programs to see if I can figure this out and ill be sure to post back what i did to get it working (if i can).

Thanks