cannot put tables into the stack
#19
Yes of course the custom site cannot do all of the things that the built-in sites can do. The fold/check is one of those things. The fold/check should work fine with PartyPokerModern. You are supposed to only use the custom sites for small poker networks that aren't supported by SaT.

Why did you decide to use a custom site, when you said the built-in PartyPokerModern was working with 3 color action buttons? Why are you not using PartyPokerModern?

If you want the table to move back to the stack when the hand is over, you need to go to Settings->Advanced Options, and enable the checkbox for "Stack table at End of Hand", and then you need to Remove and re-Include the site, so that you can grab the colors for the cards. For this you will likely want to use white cards and not a 4 color deck.

http://www.stackandtile.com/sat/help/flo...-hole-card

But I usually don't recommend that you use this setting, because when a hand is over, you will be dealt cards again for the next hand, and you will have another decision very soon anyway.
Reply


[-]
Quick Reply
Message
Type your reply to this message here.

Username::
Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)
Please select the number: 2
1 2 3 4 5 6 7 8 9 10

Messages In This Thread
cannot put tables into the stack - by taitpausi - 08-24-2017, 03:16 AM
RE: cannot put tables into the stack - by Guest - 08-24-2017, 09:15 PM
RE: cannot put tables into the stack - by taitpausi - 09-04-2017, 01:26 AM
RE: cannot put tables into the stack - by taitpausi - 09-04-2017, 02:27 AM
RE: cannot put tables into the stack - by taitpausi - 04-16-2018, 10:27 PM
RE: cannot put tables into the stack - by taitpausi - 04-16-2018, 11:10 PM
RE: cannot put tables into the stack - by taitpausi - 04-17-2018, 08:38 PM
RE: cannot put tables into the stack - by taitpausi - 04-17-2018, 09:34 PM
RE: cannot put tables into the stack - by taitpausi - 04-17-2018, 09:47 PM
RE: cannot put tables into the stack - by taitpausi - 04-17-2018, 09:51 PM
RE: cannot put tables into the stack - by taitpausi - 04-17-2018, 10:06 PM
RE: cannot put tables into the stack - by SaT_Admin - 04-17-2018, 10:52 PM
RE: cannot put tables into the stack - by taitpausi - 04-18-2018, 02:29 AM