(02-26-2021, 06:11 AM)SaT_Admin Wrote:(02-26-2021, 04:36 AM)junyguitar Wrote: Tables not detected on GG and put into grid slots at all. They are not recognized at all. But after i remove and include again ggnetwork it works well.Thats strange. I dont think removing and re-including should make any difference here. Tables should always be detected. The re-include process just grabs the button colors when you press F10. But table detection should remain the same...
Well but it has been like that everyday on GG
(02-26-2021, 06:11 AM)SaT_Admin Wrote:(02-26-2021, 04:36 AM)junyguitar Wrote: Ahah sorry about the Fs mixing up. Yeah F10 not folding. I have a laptop connected via hdmi cable to another monitor. (i am using this hdmi one as the primary one). Stack is on secondary monitor (laptop one) and grid with 6 slots on primary oneIf your two screens (laptop + external) have different scaling %s in windows, then this could be a reason why the hand isn't folding. Try the solutions on this page and let me know if it fixes Winamax:
https://www.stackandtile.com/sat/help/wi...caling-fix
Scaling %s are the same on both 100-500 and what doesnt make sense is until yesterday it was working perfectly. Today winamax made an update i dont know if thats the issue. Dont you have any other user reporting this issue? I tried the test and step 1 of the page above. Test doesnt recognize any table when hover over it. Pokerstars and GG worked fine today (GG still had to reinclude like i said)
(02-26-2021, 06:11 AM)SaT_Admin Wrote:(02-26-2021, 04:48 AM)junyguitar Wrote: Also, i use hm3 and sharkscope huds. Don´t know if that can be related...These shouldn't matter
Ok then. I didnt change anything on my setup since yesterday so i dont really understand